{"id":4703,"date":"2021-09-13T14:29:50","date_gmt":"2021-09-13T18:29:50","guid":{"rendered":"https:\/\/plomberiechayer.com\/faire-linstallation-dune-laveuse-comme-un-pro\/"},"modified":"2022-08-24T11:55:53","modified_gmt":"2022-08-24T15:55:53","slug":"how-to-install-a-washing-machine-like-a-pro","status":"publish","type":"post","link":"https:\/\/www.plomberiechayer.com\/en\/how-to-install-a-washing-machine-like-a-pro\/","title":{"rendered":"How to install a washing machine like a pro!"},"content":{"rendered":"

How to install a washing machine like a pro!<\/h1>\n

Installing a washing machine<\/strong> is much simpler that it may seem. If you\u2019re thinking about doing it yourself, you can rest assured that you won\u2019t need any advanced training in plumbing! All you have to do is read up on it and make sure to follow all of the required steps.<\/p>\n

Washing-machine installation: a simple connection will do the trick<\/h2>\n

Are you considering renovations or a new layout for your laundry area? If your goal is to make simple modifications, you can probably make them yourself. If you\u2019re relatively certain that you have the required skills, you can easily insert two T outlets into the visible copper pipes using compression fittings. No welding is necessary and there\u2019s no need to contact a professional.<\/p>\n

However, for more complex tasks (for example, if your hot and cold water supply lines aren\u2019t nearby), it would be preferable to take advantage of the expertise of an experienced plumber.<\/p>\n

You can replace your washer in five easy steps!<\/h3>\n

Do you simply need to replace your washing machine? As long as all of the necessary parts are already installed and there are no anomalies with the drainage or electricity, all you have to do is follow the directions below.<\/p>\n

1. Connect the hoses to the spigots<\/strong>
\nThe water for your washer is supplied by two short hoses (or a lever valve located on the back of the machine) that supply hot and cold water. The first thing you need to do is screw the ends of these hoses onto the hot and cold water supply valves. However, be careful not to over-tighten the plastic hoses.<\/p>\n

2. Connect the drain hose <\/strong>
\nUOnce the water supply hoses are connected, put the new drain hose in the same place where the previous one was located.<\/p>\n

3. Connect the drainpipe<\/strong>
\nIf the drain hose doesn\u2019t empty directly to a sink or basin, you will have to connect it directly to the wastewater drainpipe. Make sure that it\u2019s located at least 4 centimeters (1\u00bd inches) away in order to receive the water that drains out of the machine.<\/p>\n

4. Level the washing machine <\/strong>
\nAScrew the leveling feet in or out to ensure that the machine sits level. Of course, this step won\u2019t be necessary if your washing machine has self-leveling feet.<\/p>\n

5. Plug everything in! <\/strong>
\nVYou\u2019re now ready to hook up your washing machine and put your system to the test. All you have to do is plug the machine into a properly grounded 120-volt outlet.<\/p>\n

Abide by all building codes<\/h3>\n

Before proceeding with any renovations, it\u2019s always important to make sure you\u2019re in compliance with current building regulations. This can be even more complicated in the case of an older home. Complex plumbing that doesn\u2019t conform to the usual standards can make your life more difficult.<\/p>\n

However, if your home was built more recently, it\u2019s easy to comply with all applicable regulations. The most important thing is to prevent the drained water from making its way back into the washing machine.<\/p>\n

To do this, you\u2019ll need to ensure the following:<\/p>\n